Well yesterday I was posting about the experience of using Ubuntu 9:10 and after a few days playing around with my ubuntu, then I declare satisfied with the performance of this ubuntu OS.
Now before I get started on how to install modem evdo maybe there among you who want to try the Ubuntu operating system then you can read the tutorial here and after installing the next most important thing is to install the connection because everyone has guns repository cd (cd installer source program2 reply
in linux).
So usually after we install software or file2 important need and that's all we can do by downloading directly from the web ubuntu.
If your connection is a bit slow, then you can buy a full reply ubuntu cd repositorynya usually costing in the range Rp50.000an consisting of an assortment of cd or dvd form.
Well there are a variety of ways that can be done to install the modem evdo but my success using this method and successfully connected. Incidentally my modem haier ce100 but this is supposed to be for all usb modem just change the parameters aja.
After you download the wvdial please extract (there will be 4 after you extract the program) and then install it by double-clicking (like install. Exe in windows). Wvdial requires three other files that you downloaded earlier and install it in any order. Otherwise it will exit the error sequence. So please try one by one (I forget the order). If he wants to be installed first which means that, as well as for the second, and so on.
Terms:
- How to open a terminal. Click the Application -> Accessories -> Terminal
- Usually when in terminal sometimes requires a password. And password you typed is not going to look so go ahead type in your password. Then press Enter and if successful then you enter the command to be executed. And do not ask for the password again.
WAY # 1
- Before install unplug all / any usb device that is connected to your computer includes a modem. then restart the computer.
- Once inside Ubuntu, plug your modem Haier CE100/apapun modem to the computer. Wait until the new drive as usual when we plug USB Flash Drive.
- Then right-click the new drive click EJECT not the other.
- Open a terminal and type the following command lsusb
- It will display several lines like this:
Bus 003 Device 001: ID 1d6b: 0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b: 0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 201E: 2009
Bus 002 Device 001: ID 1d6b: 0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b: 0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 14cd: 6600 Super Top USB 2.0 IDE DEVICE
Bus 001 Device 001: ID 1d6b: 0002 Linux Foundation 2.0 root hub note that my bold. 201E = id vendor id, while 2009 was the product .. If your modem is another type, usually as the only vendor id or id productnya different.
To recognize the modem vendor id no frills usually does nothing else behind it. Or if there is another embel2 usually Qualcomm, etc. of the telecommunications company.
Still in the terminal and type the following code gedit / etc/udev/rules.d/99-evdo-modem.rules
Opens like notepad and then copy and paste the following code SYSFS {idVendor} == "201E", SYSFS {idProduct} == "2009", RUN + = "/ usr / bin / eject% k then save.Note: On {id vendor id} and {product} suit your modem. If my modem is detected 201E and 2009 should be if your modem haier ce100 kode2nya same.
Then type this command in the terminal: sudo modprobe usbserial vendor = 0 × 201E product = 0 × 2009
Then type dmesg
I assume you've installed wvdial, if not then you have to install wvdial first before it can move to the next step. If it is then this step can be continued. Type the command sudo gedit / etc / wvdial.conf (will appear like notepad) and then add the following code (do not remove the code that's already there):
[Dialer smart]
Auto DNS = on
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0 = 0 & C1 & D2 + FCLASS = 0
Stupid Mode = yes
Modem Type = Analog Modem
ISDN = 0
New PPPD = yes
Phone = # 777
Modem = / dev/ttyUSB0
Username =? Smart?
Password =? Smart?
Baud = 460800
Dial Command = ATDT
FlowControl = crtscts
Ask Password = 0
Stupid Mode = 1
Compuserve = 0
Idle Seconds = 300
Now run the command: sudo wvdial smart
If it says the following:
-> Wvdial: Internet dialer version 1.60
-> Can not get information for serial port.
-> Initializing modem.
-> Sending: ATZ
ATZ
OK
-> Sending: ATQ0 V1 E1 S0 = 0 & C1 & D2 + FCLASS = 0
ATQ0 V1 E1 S0 = 0 & C1 & D2 + FCLASS = 0
OK
-> Modem initialized.
-> Idle Seconds = 300, disabling automatic reconnect.
-> Sending: ATDT # 777
-> Waiting for carrier.
ATDT # 777
CONNECT 3100000
-> Carrier detected. Starting PPP immediately.
-> Starting pppd at Tue Jan 3 15:19:52 2010
-> Pid of pppd: 2777
-> Using interface ppp0
-> Pppd:? U `@ l`
-> Pppd:? U `@ l`
-> Pppd:? U `@ l`
-> Pppd:? U `@ l`
-> Pppd:? U `@ l`
-> Local IP address 10.11.149.207 -> This may be different
-> Pppd:? U `@ l`
-> Remote IP address 10.17.4.12 -> This may be different
-> Pppd:? U `@ l`
-> Primary DNS address 10.17.3.244 -> This may be different
-> Pppd:? U `@ l`
-> Secondary DNS address 10.17.3.252 -> This may be different
-> Pppd:? U `@ l` That means you are connected to the internet. And still in the terminal press CTRL + Shift + T and then type the following command: ping-s-t yahoo.com
To disconnect or turn off the connection you just press CTRL + C
Ok good luck with installation of the modem and I add the following method to recognize the modem:
Type the command sudo lsusb-v text will appear and you can find a lot of carefully about which one is the usb modem. This usually can be recognized from the vendor.
Haier like it will be among the writings that appear are Qualcomm, Incorporated, or Qualcomm CDMA Technologies MSM.
No comments:
Post a Comment